ASTM D3910−11 Standard Practices for Design Testing and Construction of Slurry Seal

This standard is issued under the fixed designation D3910; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.

A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.

ASTM D3910−11 Standard Practices for Design Testing and Construction of Slurry Seal

Scope
1.1 These practices cover the design, testing, and construction of mixtures for surface treatment of pavements. It is written as a guide and should be used as such.

End-use specifications should be adapted to conform to job and user requirements.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use.

It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3910−11 Standard Practices for Design Testing and Construction of Slurry Seal

Significance and Use
4.1 These slurry seal practices are written as a guide and should not be construed as specifications.

4.2 End-use specifications should be adopted to conform to job and user requirements.