ASTM D2028/D2028M−15 Standard Specification for Cutback Asphalt Rapid-Curing Type

This standard is issued under the fixed designation D2028/D2028M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.

ASTM D2028/D2028M−15 Standard Specification for Cutback Asphalt Rapid-Curing Type

Scope
1.1 This specification covers cutback petroleum asphalts of the rapid-curing type for use in the construction and treatment of pavements.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard.

The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other.

Combining values from the two systems may result in non-conformance with the standard.

ASTM D2028/D2028M−15 Standard Specification for Cutback Asphalt Rapid-Curing Type

Properties
3.1 The cutback asphalt shall not foam when heated to application temperature and shall conform to the requirements prescribed in Table 1.
4. Test Methods
4.1 The material shall be sampled in accordance with Practice D140, and the properties enumerated in this specification shall be determined in accordance with the following ASTM methods: