ASTM D2027/D2027M − 13 Standard Specification for Cutback Asphalt Medium-Curing Type

This standard is issued under the fixed designation D2027/D2027M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.

ASTM D2027/D2027M − 13 Standard Specification for Cutback Asphalt Medium-Curing Type

Scope
1.1 This specification covers cutback petroleum asphalts of the medium-curing type for use in the construction and treatment of pavements.
1.2 The values stated in SI units or inch-pounds are to be regarded separately as standard.

The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of each other.

Combining values from the two systems may result in non-conformance with the standard.

ASTM D2027/D2027M − 13 Standard Specification for Cutback Asphalt Medium-Curing Type

Properties
3.1 The cutback asphalt shall not foam when heated to application temperature and shall conform to the requirements prescribed in Table 1.

ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this standard.

Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility