ASTM C1116/C1116M − 10a Reapproved 2015 Standard Specification for Fiber-Reinforced Concrete

ASTM C1116/C1116M − 10a Reapproved 2015 Standard Specification for Fiber-Reinforced Concrete

Scope

1.1 This specification covers all forms of fiber-reinforced concrete that are delivered to a purchaser with the ingredients uniformly mixed, and that can be sampled and tested at the point of delivery.

It does not cover the placement, consolidation, curing, or protection of the fiber-reinforced concrete after delivery to the purchaser.

1.2 Certain sections of this specification are also applicable to fiber-reinforced concrete intended for shotcreting by the dry-mix process when sampling and testing of concrete is possible only at the point of placement.

In this case, the sections dealing with batching plant, mixing equipment, mixing and delivery, and measurement of workability and air content, are not applicable.

1.3 This specification does not cover thin-section glass fiber-reinforced concrete manufactured by the spray-up process that is under the jurisdiction of ASTM Subcommittee C27.40.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard.

The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other.

Combining values from the two systems may result in non-conformance with the standard.

ASTM C1116/C1116M − 10a Reapproved 2015 Standard Specification for Fiber-Reinforced Concrete

Basis of Purchase

5.1 The basis of purchase for fiber-reinforced concrete shall be in accordance with the Basis of Purchase Sections

of Specification C94/C94M or Specification C685/C685M.